It is a double electrical outlet. It may also be called as electrical sockets or twin sockets.

The SBSAR file gives users a chance to set the panel to be a double socket or single outlet. Users can switch on and off the left and right switches. The colors of the panel, the red mark and screw can also be changed.

It is a wallpaper with tremendous vertical lines as patterns. The vertical patterns are 3D. Users can feel the bumps.

With the SBSAR file, users are able to tune the colour, pattern scale, number of line segments and manage dirt.

It is a worn brick wall. Some bricks have been badly damaged and exposed inner part of the bricks which have different colours than outer paint. The bricks were roughly glued together. Thus, a lot of cement exists out of the grout.

The SBSAR gives users the flexibility to set the brick amount, colours and fine tune the damage level.

It is an old worn concrete wall which has a lot of large holes exposing inner reinforcement bars (rebars). The outer paint is also peeling off. Numerous cracks also appear on the concrete.

Using the SBSAR file, the wall colour, number of concrete plates and rebars, depth of holes etc. can be set.

It is the base concrete texture. It is primitive and raw having large and small pores on the surface.

It is suitable for building plain walls, especially those in industrial style. The SBSAR file allows the hole sizes and depths to be adjusted.

It is a wall made of concrete plates, but it is highly eroded making a very bumpy surface.

With the sbsar file, the grout intensity and damage level can be adjusted.

It is a brick wall texture which can be used for texturing medieval forts. Of course, it is suitable for modern architecture. There are smaller pebbles between large bricks.

It is a concrete wall with some plaster, but has numerous dents of various sizes due to bumps, hits or shots.

They are wood planks with nails on both ends. Rust can be found on the nails. The wood planks has a lot of worn areas due to weathering. Knots also appear on the planks.

It is a ground full of shiny gems. The crystal like patterns can be found on those ruby.

It is recommended to mix it with a translucent shader.

This fencing wall is made of bamboos. The color variation and micro surface is clearly shown. If you want it to be more green, you can adjust the hue.

From the grid pattern, we know that they are waffle slabs made of reinforced concrete. They grid pattern allows concrete ribs running in 2 directions perpendicular to each other on its underside.

As it appears in public area, dust and dirt can be found on the surface. Besides, there are imperfection at junctions between slabs.

It is a concrete texture composed of Corinthian columns. Due to weathering and aging, a lot of wear and cracks appear on the surface.

Despite its name columns, this texture suits extremely well for walls and urns.

It is a concrete wall made of numerous concrete plates. Due to weathering, the concrete plates have cracks, pores and dirt.

If you are going to 3D model a concrete wall, please do not miss this texture!

It is a classical corrugated metal sheet where is commonly used to build walls of factories or construction sites.

Dirt and edge wear can be found on this texture.

This is a stucco plaster. By examining the surface, a lot of fan shape trowel strokes or marks can be found.

This is an oxidized iron sheet on which there is numerous scratches and dents. Most of the scratches and pits corroded and are covered with rust. Besides, some of the rust is dripping down due to the rain wash.

This is a texture made of lots of gravel. It can be used as pavement for roads or to cover mud in backyard.

With your imagination, it could also be a wall texture.

This is a very raw wood plank. Due to aging, most of the planks are worn. It is made of rough type of wood that gives it a very bumpy texture.

It is a classic red brick wall. On the top is a thin layer of plaster that has a botched workmanship. Brush strokes are prominent. Besides, the plaster only covers some parts of the wall.