These colorful tiles are ideal materials for producing mosaic artworks. There is color variation on each tile. Besides, golden glitter was spread across the mosaic pieces creating many tiny sprinkles.

As it is designed to be used for texturing art masterpieces, the tile layout is a bit random and the heights of tiles are uneven.

Dirt appear close to edges too.

It is a worn and brown leather material. This leather has a very typical pattern which has scratches and dents on the surface.

Its base colors have some variations. Besides, aging, worn parts and dirt could be found on this texture.

It is a very bumpy icy surface made of broken ice. The shiny ice surface reflects the blue sky which tints the ice in blue.

As the ice looks rocky, this texture can act as an uneven ground by changing the colors to grey.

It is definitely an excellent material for making quilted coats or puffer jackets. Some padded jackets are very colorful. This texture is one of these brightly colored outer garment.

Each quilted cell is puffed with cotton, so the whole texture bulges outwards.

To match the major material colors, orange threads is used.

The stitch color can be changed by downloading the SBSAR file.

This shiny silver texture is a typical material for making padded coats and jackets. The material is sewn into diamonds producing padded patterns. Each diamond pocket has some cotton inside. This ensure inner cotton is always evenly distributed.

There are also wrinkles, stitches, dirt and folds on the surface.

It is a typical nailed leather material for sofas. All nails are highly oxidized and the red texture is worn. It has a lot of cracks and scratches on its surface.

The peeled off area exposes the underneath leather color which is grey.

It is a chain-link fencing made of iron or steel. It is galvanized to reduce corrosion, so it can keep its shiny silver color.

Chain-link Iron Wire Fence Texture Woven in Diamond Shape
(Metal 0017) is similar to this material except Metal 0017 is highly oxidized and has a lot of rust.

They are drop ceiling tiles in most of the offices. This mineral fiber ceiling is the most widely adopted type.It has a lot of pores on the surface.

Ceiling tiles are usually mounted on a suspended aluminum frame. Since aluminum is a soft metal. The frame can easily be deformed.

Edge wear also happens on the metal frame.

It is a high wet ground which is very muddy and marshy. There are pebbles and stones scattered among the whole land, but they are covered by clay.

On this bumpy soft ground, there are also a few puddles.

It is Chevron Parquet wood flooring though it looks like a Herringbone floor very much.

You may find the different between Chevron and Herringbone by comparing Red Brick Texture in Herringbone Pattern (Bricks 0003).

Each wooden tile has different colors and bark patterns from others. This makes every tile unique.

It is a red tufted leather which is ultimately for sofas and chairs. The red buttons make depressions at intervals by pushing the leather in. This creates the characteristic of tufted sofas.

Since it is a leather, scratches is almost unavoidable. Besides, dirt and pits appear on the material surface too.

It is a chain-link fence made of iron or steel. Frequently, it is woven in diamond shapes which form the characteristic of this type of fences.

Due to weathering, this fence has some degrees of deformation. Rust, oxidation and dirt can be everywhere. There are some worn on wires too.

It is a metal plate painted in blue, but there are tons of scratches on the paint coating revealing the shiny iron metal underneath the pigment.

There are big and small scratches. Some of the paint is peeled off.

It looks like a piece of wenge wood which is a kind of hard timbers, but its glossy and ultra smooth surface tells us it is in fact a lacquered veneer.

The deep red wine color is its signature color.

Similar to " Teak Wood Veneer or Lacquered Veneer Texture (Wood 0012)", it is a superior material for furniture such as cupboards.

From the wood bark pattern and the extremely smooth surface, it is definitely a lacquered veneer.

It shows the wood pattern of a teak tree which has deep brown colors.

Lacquered veneer is largely used as covers of wooden furniture.

It is an artificial leather having the most prominent scale patterns of alligator or crocodile skin.

Scars and wrinkles can be found on each single scale of the skin. Occasionally, pores appear on some scales.

Each scale also curves slightly inward.

As most of leather, the material is dyed into brown.

It is a primitive jade stone. Various green marble patterns can be found on the surface.

Yellowish spots also appear since this texture is a raw rocky material.

It is not a perfect green jade. There is subtle amount of yellow tint mixes with the precious green parts.

Clearly, they are typical black and white marble tiles in a checker layout. White cracks are running across black tiles while black crackles are spreading over white checkers.

They are commonly used for paving indoor floors.

This iron sheet has a lot of holes as it is a punched or perforated metal sheet. Its surface tells us it is oxidized and a lot of reddish and yellowish rust has formed on the surface.

It is a desired material for machine cases.

It is a highly reflective black and white marble plate.

The white cracks have different width and the black cloudy background creates an illusion of depth.

It is a perfect material for texturing walls and floors in 3D architectural visualization (archviz).