This is a typical black and white tiles. Each 45-degree rotated black tile connects to 4 white tiles. This old-fashioned tiles could be found in many old-time movies.

The dirt enhances the aging effect.

These green tiles have a high reflectivity. Again, they are classic tiles for floors, kitchens and toilets.

Some colors have been washed out. It gives the tiles vintage appearance.

This texture is marvelous for walls and floors.

The brown tiles are arranged in a classical pattern. Scratches and spots are all over the surface.

It is a fine material for texturing old floors.

This is an old-fashioned square tiles. The tiles are severely damaged, so it exposes the white and brown base material.

It is extremely bumpy and with many missing pieces.

These small red tiles can commonly be found on walls, floors, workbenches or pillars.

This texture is comparatively clean. You can add dirt, scratches and worn-out parts yourself.

They are typical tiles which can be found in bathrooms or toilets. Comparing to Tiles 0001, it has no broken tiles and dirt, but it is not perfectly aligned. In real world, nothing is perfectly aligned.

They are typical tiles which can be found in bathrooms or toilets. These washroom tiles are worn-out. There are mini pits and pores on some tiles. The edges and surface are covered with dirt and dust.

Among all rooftop tiles, this one must be the most typical. In both eastern and western countries, people also use this tiles for roofing.

Some tiles are broken and dirt can be found on them.

The classical fish scale roof tiles make up this weary rooftop texture. It is a worn-out rooftop with a lot of dirt, scratches and mosses.

The surface is rather bumpy and holey due to aging.

These rocks have a lot of sharp edges and the surface is full of tiny stones.

If you examine the edges closely, you will find there is sand between rocks.

This texture is appropriate for both walls and floors.

It is a variant of Rock 0001, but without pebbles.

These rocks have a lot of sharp edges and the surface is full of tiny stones and pebbles.

If you examine the edges closely, you will find there is sand between rocks.

Obviously, it is an aluminum foil with a lot of wrinkles. It keeps the high reflectivity of aluminum though it is highly crumpled.

This paper texture is printed with traditional Japanese style sea waves.

This Japanese style wave pattern can be found on many Japanese printouts, handcrafts and products.

It is a plain metal plate having uneven surface. It is highly oxidized. It is not as reflective as new metal, but it still has a little glossiness.

As usual, highly oxidized iron comes with rust.

This metal pattern exists in many places, e.g. floors of elevators. It is the most typical 5-strip pattern for increasing fiction.

It is not just a metal plate, but also a rusty texture. Dirt is also on the surface.

It is a plain iron metal. The surface tells it is highly oxidized leaving only a few shiny areas.

Besides, the surface is covered with rust and dirt.

It is a rusty metal plate with typical cross patterns cover the whole surface. The bumpy cross pattern is used to increase the fiction and grip of metal especially when it is being used for flooring.

Dirt can also be found on the texture.

This texture composes of tiled black and white checkers with marble patterns on each checker. There are also golden lines separating checkers.

It is a broken glass with a lot of cracks running from the center. This kind of glass breaking pattern can be made by a sharp hit such as a bullet shot.

There are both circular cracks and radical cracks spreading out from the central point of fracture.

Since it is a transparent texture, an alpha map is also available.

This texture is between snow and ice. When someone steps on snow, the snow might melt. The snow gets the glossy and shiny ice characteristic after it has been re-frozen.