It is a texture of lemon skin. Oil glands can be found on the surface. Remember to apply the scattering / subsurface map to create realistic peel.

This material can be used together with Lemon Slice Cross Section
(Food 0020) to produce a perfect slice of lemon.

The oil gland colour intensity, green tint intensity, skin texture, wrinkle length etc. can be managed through the Substance SBSAR file.

These are ceramic tiles arranged in a geometric rhombus style. Each set of three creates a virtual cube.

With the SBSAR file, the tile colour, tile position random, grout colour, cement height, edge wear etc. can be set.

This lemon slice is a cross section of a lemon.

This material can be used together with Lemon Skin Texture
(Food 0021) to produce a perfect slice of lemon.

The color of the peel, albedo(skin), juice sac, speck color, color variation, amount of oil glands, columella height etc. can all be changed by the Substance SBSAR file.

It is an old and worn concrete wall having loads of chipped paint.

The paint color, concrete color, damage level, amount of scratches, amount of dents, peeling effect intensity etc. can all be controlled through the SBSAR file.

It is a tarp made of plastic fabric. It is commonly used as a covering in garden or outdoors.

The color, intensity of folding marks, amount of wrinkles etc. can all be managed through the Substance SBSAR file.

It is a metal mesh having a wavy pattern.

The color and bevel can be adjusted by the Substance SBSAR file.

It is the chipped paint of a machine. The exposed metal is highly rusted and the rust is dripping down the surface.

The paint color, intensity of blisters, rust color, rust amount, range of dripping rust, amount of cracks etc. can be defined by the SBSAR file.

It is a machinery case having a yellow coating, but there is a lot of chipped paint.

The colors of paint and rust, amount of rust, cracks, dents and dirt can be adjusted with the Substance SBSAR file.

It is a painted metal sheet, but there is some peeling paint. The chipped area exposed the metal that becomes very rusty.

The color of the paint, color of the rust, amount of paint blisters, amount of rust, length of dripping rust, amount of scratches etc. can be controlled by the Substance Designer SBSAR file.

It is a metal panel with a lot of holes. The larger and smaller holes are arranged in an alternating pattern. There is a metal strip between boundaries of tiles.

The paint color, metal color, amount of scratches, width of metal strips and dirt level can be adjusted through the Substance SBSAR file.

It is a metal panel that is perforated. It can be used as a ceiling tile to hide the ducting.

The colors, gap width, amount of scratches, level of dirt can be controlled by using the SBSAR file.

It is a perforated sheet made of brass having overlapping circles as pattern. This perforated sheet can be used as decorated panels for inserts of cupboards and doors.

The color, bevel, amount of brushed marks, edge wear level etc. can be managed by the SBSAR file.

It is a close up of carbon fibres which is very light and very hard, so it is often used in machinery and vehicle carcasses.

The color, color variation, fibre curvature and level of deformation can be set by the Substance SBSAR file.

It is a chainmail made of numerous flat gold rings. The rings have been oxidized and have a lot of scratches.

The metal color, surface roughness, ring openings, degree of oxidation, amount of bumps, number of scratches, level of dirt etc. can be adjusted by the Substance SBSAR file.

This is an old iron chainmail made of oxidized flat rings.

The ring color, surface finishing, oxidation level, amount of rust, dirt level etc. can be controlled by the Substance Designer SBSAR file.

It is a grid of waffle-shaped concrete slabs having a tint of brown.

The concrete color, amount of pores, intensity of dust, junctions, dirt color etc. can be manipulated by the Substance SBSAR file.

This bricks are arranged in an uneven manner. Its use is more aesthetic more than structural. Therefore, this texture is commonly used for garden or sitting room decoration.

The offset, offset random, bevel, height variation, edge wear level, intensity of bump, intensity of trowel marks and wear highlight can be set by the Substance SBSAR file.

It is a metal fencing, but the iron net is highly oxidized.

The iron color, surface texture, level of bending, degree of oxidation, color of rust, range of rust can be managed through the SBSAR file.

Besides the default oxidated default preset, there are also presets of perfect, highly oxidized, highly rusted.

It is a metal fencing with a lot of rust.

The metal color, bump intensity, deformation level, oxidation level, rust color, rust amount can be managed through the SBSAR file.

Besides the default rusty default preset, there are also presets of perfect, highly oxidized, highly rusted.

They are rather long stone bricks which are usually used for wall cladding as a decoration.

The offset, offset random, bevel, tile height variation, edge wear level, bump intensity, trowel mark intensity, wear highlight etc. can be controlled via the Substance SBSAR file.