It is a typical nailed leather material for sofas. All nails are highly oxidized and the red texture is worn. It has a lot of cracks and scratches on its surface.

The peeled off area exposes the underneath leather color which is grey.

It is a concrete wall painted in green, but it has a lot of cracks and most of the paint is peeling off.

The peeled off area shows the light brown concrete wall which is rather bumpy and has a lot of pores.

Scratches can also be found on both the paint and the concrete wall.

It is a ripped cardboard exposing underneath wavy patterns.

Usually, the external and internal colors of a carton box paper are different.

By close examination, fiber texture can be found on the surface.

This highly folded red and bloody texture looks like intestines, organs or flesh.

Veins and reddish spots can be found on the surface.

It is a remarkable material for texturing monsters and aliens.

It is a rocky ground surface which can be found on asteroids or outer space planets.

The planetary outer shell is badly hit by millions of meteors created numerous meteor craters.

Large craters have the shapes of volcanoes while small shooting stars leave a lot of dents on the bumpy bottom base.

Those planks are made from cedar wood. It has a mixture of brown and pink colors.

It is a fabulous material for both walls and floors. Most Japanese sauna rooms are built by cedar wood planks.

Each plank has minor edge wear.

It is a stone wall cladding. The stones are of irregular shapes. Some are round; Some are more rectangular and pentagonal.

Each stone has different degrees of damages. Dirt and edge wear can be found on each stone.

It is a red brick wall but bricks are organized in a weird angle, so brick corners are facing out.

Each brick has different degrees of damage. Pits,trowels and dirt is found everywhere.

They are drop ceiling tiles in most of the offices. This mineral fiber ceiling is the most widely adopted type.It has a lot of pores on the surface.

Ceiling tiles are usually mounted on a suspended aluminum frame. Since aluminum is a soft metal. The frame can easily be deformed.

Edge wear also happens on the metal frame.

It is a grassland fully covered by fresh green grass which has different colors and length.

The grass colors have light green, dark green and yellow.

This texture is superb for mowing.

It is a high wet ground which is very muddy and marshy. There are pebbles and stones scattered among the whole land, but they are covered by clay.

On this bumpy soft ground, there are also a few puddles.

This is a highly oxidized iron sheet with stacks of rust formed on its surface. It is almost fully covered with oxidized substance. The rust has different colors including yellow, orange, red and brown.

The base metallic plate is more shiny than rusty materials. In fact, rust is not a reflective material.

It is a raw wood texture painted in white. Due to weathering, the paint coating layer is peeling off.

It is a rather rough and raw wood having very bumpy tree barks and textures. The wood plank is broken showing a few long vertical cracks.

Mud and dirt covers the painted wood.

It is Chevron Parquet wood flooring though it looks like a Herringbone floor very much.

You may find the different between Chevron and Herringbone by comparing Red Brick Texture in Herringbone Pattern (Bricks 0003).

Each wooden tile has different colors and bark patterns from others. This makes every tile unique.

From its yellowish color, it tells us it is a sandy rock. Usually, this type of rocky materials can be found on cliff.

Cliff rocks are extremely bumpy. The rocks seem to be divided into bands. It also looks like a stack of rocky layers. This characteristic defines the appearance of cliff rocks.

Due to wind and water weathering, a lot of horizontal stripes appear on the surface. To be precise, the rocks were etched by wind and water flow many decades ago.

It is a red tufted leather which is ultimately for sofas and chairs. The red buttons make depressions at intervals by pushing the leather in. This creates the characteristic of tufted sofas.

Since it is a leather, scratches is almost unavoidable. Besides, dirt and pits appear on the material surface too.

It is a chain-link fence made of iron or steel. Frequently, it is woven in diamond shapes which form the characteristic of this type of fences.

Due to weathering, this fence has some degrees of deformation. Rust, oxidation and dirt can be everywhere. There are some worn on wires too.

It is a metal plate painted in blue, but there are tons of scratches on the paint coating revealing the shiny iron metal underneath the pigment.

There are big and small scratches. Some of the paint is peeled off.

It is a large piece of cedar wood which has a very light yellowish color. There are quite a lot of barks on its surface.

The texture pattern has different colors of tree barks ranging from yellow to brown. Surely, barks have darker colors.

Since it is a natural wood, the surface is not very reflective.

It looks like a piece of wenge wood which is a kind of hard timbers, but its glossy and ultra smooth surface tells us it is in fact a lacquered veneer.

The deep red wine color is its signature color.

Similar to " Teak Wood Veneer or Lacquered Veneer Texture (Wood 0012)", it is a superior material for furniture such as cupboards.