It is a chainmail made of numerous flat gold rings. The rings have been oxidized and have a lot of scratches.

The metal color, surface roughness, ring openings, degree of oxidation, amount of bumps, number of scratches, level of dirt etc. can be adjusted by the Substance SBSAR file.

This is an old iron chainmail made of oxidized flat rings.

The ring color, surface finishing, oxidation level, amount of rust, dirt level etc. can be controlled by the Substance Designer SBSAR file.

It is a grid of waffle-shaped concrete slabs having a tint of brown.

The concrete color, amount of pores, intensity of dust, junctions, dirt color etc. can be manipulated by the Substance SBSAR file.

This bricks are arranged in an uneven manner. Its use is more aesthetic more than structural. Therefore, this texture is commonly used for garden or sitting room decoration.

The offset, offset random, bevel, height variation, edge wear level, intensity of bump, intensity of trowel marks and wear highlight can be set by the Substance SBSAR file.

It is a metal fencing, but the iron net is highly oxidized.

The iron color, surface texture, level of bending, degree of oxidation, color of rust, range of rust can be managed through the SBSAR file.

Besides the default oxidated default preset, there are also presets of perfect, highly oxidized, highly rusted.

It is a metal fencing with a lot of rust.

The metal color, bump intensity, deformation level, oxidation level, rust color, rust amount can be managed through the SBSAR file.

Besides the default rusty default preset, there are also presets of perfect, highly oxidized, highly rusted.

They are rather long stone bricks which are usually used for wall cladding as a decoration.

The offset, offset random, bevel, tile height variation, edge wear level, bump intensity, trowel mark intensity, wear highlight etc. can be controlled via the Substance SBSAR file.

It is a spiral duct which can is commonly used for HVAC.

The color, amount of polished lines, amount of scratches, dirt level etc. can be changed by using the Substance SBSAR file.

It is an elastic duct made of aluminium foil and some metallic rings. The crumpled texture offers the flexibility for bending. Therefore, this kind of ducts is usually used as a gas pipe.

The color of the foil and metal rings can be changed by the Substance SBSAR file.

It is a flexible plastic conduit for housing electrical or LAN cables to tidy up the wiring.

The color, level of distortion, amount of dirt etc. can be managed through the SBSAR file.

It is an asphalt ground which is full of puddles. You may extract related PBR maps as decals and combined with your existing ones to create puddles for your models.

The colors of the puddles and ground, and the roughness of the puddles and ground can be changed by the Substance SBSAR file.

It is a PVC gas or water pipe having internal frame as the structure.

The color of the plastic and frame, amount of dirt etc. can be adjusted by using the Substance SBSAR file.

It is a steel cable which can be found in daily life. Dirt can be found on the surface.

The color, contrast, amount of scratches, level of distortion, level of dirt can all be managed through the Substance SBSAR file.

It is a typical tough and rough rope made of jute, hemp or sisal. It has abundant amount of loose threads.

The color, contrast, amount of loose threads, level of dirt and level of distortion can be controlled by the Substance SBSAR file.

This shiny piece of metal is a brushed gold having numerous radial polished spin marks.

To apply the anisotropic effect, the anisotropy angle and level maps must be used.

However, the Blender add-on Node Wrangler will NOT automatically attach them. They must be added to the Principle BSDF node manually.

It is an iron or steel metal having a prominent radial polished or brushed marks.

To acquire the effect of the radial brushed lines, please remember to apply both the anisotropy angle and anisotropy level maps.

The color, number of brushed spins, position of the circular spins, roughness variation etc. can be managed by the Substance SBSAR file.

It is a rusty chainmail. Each ring has a small opening.

The color of the rings and rust, surface bump, ring openings, oxidation and rust can be adjusted via the Substance SBSAR file.

It is a metallic chainmail with a tad of dirt and bumps on the surface. Each ring has a tiny opening to reflect the reality.

The metal color, bump height, dirt intensity and ring openings can all be set by the Substance SBSAR file.

They are ceramic tiles having hexagonal shape. This texture is extraordinary suitable as a kitchen tile.

The color of the tiles and grout, level of color variation, surface bump, position random, range of overflow paint, level of edge wear, amount of dents and scratches can be set by the Adobe Substance SBSAR file.

These square lime tiles have an interesting geometric pattern.

The 2 colors of the tiles, color of the grout, level of surface bump, and level of dirt can be controlled with the SBSAR file.