It is a typical red bricks wall which can be found everywhere in England. Due to weathering, some bricks are worn and dirt is everywhere.

The bricks are arranged in running bond layout. Some bricks have a much lighter colors than others. There are also a lot of color variation between bricks.

It is a large piece of old wood plank. Micro surface texture can be found as it is not a laminated wood and not a veneer. It is a natural solid wood.

Barks also appear among the whole surface.

If this material is viewed at some angles, greasy and dirty areas can be spotted.

It is definitely an excellent material for making quilted coats or puffer jackets. Some padded jackets are very colorful. This texture is one of these brightly colored outer garment.

Each quilted cell is puffed with cotton, so the whole texture bulges outwards.

To match the major material colors, orange threads is used.

The stitch color can be changed by downloading the SBSAR file.

This shiny silver texture is a typical material for making padded coats and jackets. The material is sewn into diamonds producing padded patterns. Each diamond pocket has some cotton inside. This ensure inner cotton is always evenly distributed.

There are also wrinkles, stitches, dirt and folds on the surface.

It is a concrete wall painted in green, but it has a lot of cracks and most of the paint is peeling off.

The peeled off area shows the light brown concrete wall which is rather bumpy and has a lot of pores.

Scratches can also be found on both the paint and the concrete wall.

It is a chain-link fencing made of iron or steel. It is galvanized to reduce corrosion, so it can keep its shiny silver color.

Chain-link Iron Wire Fence Texture Woven in Diamond Shape
(Metal 0017) is similar to this material except Metal 0017 is highly oxidized and has a lot of rust.

It is a stone wall cladding. The stones are of irregular shapes. Some are round; Some are more rectangular and pentagonal.

Each stone has different degrees of damages. Dirt and edge wear can be found on each stone.

It is a red brick wall but bricks are organized in a weird angle, so brick corners are facing out.

Each brick has different degrees of damage. Pits,trowels and dirt is found everywhere.

They are drop ceiling tiles in most of the offices. This mineral fiber ceiling is the most widely adopted type.It has a lot of pores on the surface.

Ceiling tiles are usually mounted on a suspended aluminum frame. Since aluminum is a soft metal. The frame can easily be deformed.

Edge wear also happens on the metal frame.

It is a raw wood texture painted in white. Due to weathering, the paint coating layer is peeling off.

It is a rather rough and raw wood having very bumpy tree barks and textures. The wood plank is broken showing a few long vertical cracks.

Mud and dirt covers the painted wood.

It is a red tufted leather which is ultimately for sofas and chairs. The red buttons make depressions at intervals by pushing the leather in. This creates the characteristic of tufted sofas.

Since it is a leather, scratches is almost unavoidable. Besides, dirt and pits appear on the material surface too.

It is a chain-link fence made of iron or steel. Frequently, it is woven in diamond shapes which form the characteristic of this type of fences.

Due to weathering, this fence has some degrees of deformation. Rust, oxidation and dirt can be everywhere. There are some worn on wires too.

It is a metal plate painted in blue, but there are tons of scratches on the paint coating revealing the shiny iron metal underneath the pigment.

There are big and small scratches. Some of the paint is peeled off.

This texture is a very primitive and raw concrete wall. It is a plain wall with nothing on the surface but dirt and worn marks.

There are different types of worn. Some are vertical while some are irregular. Some damage creates holes and gaps. Some aged parts pop up creating scar-like marks.

It is a perfect material for walls and floors.

It is a primitive jade stone. Various green marble patterns can be found on the surface.

Yellowish spots also appear since this texture is a raw rocky material.

It is not a perfect green jade. There is subtle amount of yellow tint mixes with the precious green parts.

It is a cork board assembled by pressing small wood strips and chips into a solid slab.

Wooden cork boards can be found in many office. People like pinning memo notes on it. Therefore, it is a good companion of Wrinkled Memo Paper Texture (Paper 0002).

Some walls and floors are made of cork board too, so it is a fantastic material for these kinds of partitions.

They are chinaware tiles with Chinese patterns on the top. The porcelain tiles are highly worn and have a few big cracks.

The China tiles are mainly green and yellow with a traditional Chinese symbol.

Of course, a lot of dirt is found on the surface.

This material is suitable for china artworks such as vases. It is also a good texture for walls.

This iron sheet has a lot of holes as it is a punched or perforated metal sheet. Its surface tells us it is oxidized and a lot of reddish and yellowish rust has formed on the surface.

It is a desired material for machine cases.

They are aged and worn decking wood tiles. Each single tile has 3 wood planks. Due to aging, edges are worn.

Barks and dirt can be found on every tile.

Undoubtedly, these texture is very suitable for indoor floors.

They are Tadao Ando type of concrete plate. Concrete 0008 is horizontally arranged while this texture is vertically organized.

Besides, these concrete plates has 8 holes while Concrete 0008 has only 4 holes.

Dirt can easily be seen on the surface.