Wall decoration with embossed geometric pattern made of raw gray concrete.

Slightly rusty metal plate with scratches, dents and dirt on the surface.

It is a highly oxidised aluminium sheet having a lot of moss-like greenish substance on the metal surface.

The metal colour, intensity of polished marks, amount of scratches, amount of dents, oxidation level, dirt colour etc. can be managed via the Substance SBSAR file.

It is polished aluminium which brushed marks, scratches and dents.

The Substance SBSAR file allows you to change the metal colour, intensity of polished lines, amount of scratches, amount of dents etc.

They are octagon black and white tiles having black diamond shapes at corners. The monochrome creates the Victorian style.

The SBSAR file gives user the possibility to change the colors of the large and small tiles, adjust the colors and amount of different dirt and dust. Besides, the edge wear and dents can be manipulated.

They are limestone tiles having chipped edges and different shades of beige. There are also pits and bumps on the surface.

The SBSAR file allows users to adjust the tile color, amount and ratio of tiles, tile offset, grout color, grout width, edge wear, dent amount, scratch amount etc.

They are hexagonal tiles having teal color with a mixture of pink and cyan. Yellowish edge dirt can be found. This type of tiles is also known as Zellige.

Using the SBSAR file, users can change the edge wear level, tile bevel, bump amount, dent amount etc.

It is a old Asian floor tiles which is can be used to flooring restaurant, sitting rooms, kitchens etc.

The SBSAR file grants users the rights to change the colors of grout and dirt, adjust the edge wear level, tile position random, tile rotation random.

They are Asian style retro tiles which can be found in Hong Kong old restaurant. Dirt can be found on the surface.

The SBSAR allows users to change all the colors of the tiles, and adjust a lot of parameters such as bevel, bump, dirt etc.

They are concrete blocks and its grout is filled with excessive mortar. There are horizontal marks on the bricks.

Using the SBSAR file, users can change the colors of the blocks and cement, control the amount of mortar, and adjust other imperfection parameters.

The surface of this paint is blistering and bubbling due to ageing and bad maintenance.

The SBSAR allows users to adjust the paint color, number, size and intensity of bubbles and dents etc.

It is a tiled floor with cross-like patterns. There are edge wear, dirt, cracks, dents etc.

The SBSAR permits users to change the amount of tiles, adjust the grout width , edge wear level, tilts, surface, cracks, dents etc.

It is a galvanized metal being hammered and having a lot of rust.

The SBSAR allows users to change the hammer size, hammer effect intensity, amount of rust, scratches and dents etc.

It is a metallic manhole cover having rust, dust and even cement on the surface. The plate is rather bumpy and studs are worn and damaged.

There are 4 presets in the SBSAR file to allow users quickly create a rusty, dirty, full of cement or clean manhole cover.

The SBSAR also gives users the flexibility to change the shape of cover, amount of studs, edge wear level, damage level, rust level, dirt level, texts on the cover, position of labels etc.

It is a primitive wood plank. Large and small grains, dents and color variance can be found on this raw material.

The color and amount of grains and dents can be changed by the SBSAR file.

They are old wood planks which have a lot of wear, cracks and scratches. Wood grains can also be seen.

The plank amount, grout width, wood color etc. can be changed by the SBSAR file.

It is a worn brick wall. Some bricks have been badly damaged and exposed inner part of the bricks which have different colours than outer paint. The bricks were roughly glued together. Thus, a lot of cement exists out of the grout.

The SBSAR gives users the flexibility to set the brick amount, colours and fine tune the damage level.

It is a polished metal texture with numerous barely seen horizontal lines. Scratches and dents can be found on surface.

The SBSAR allows users to adjust the amount of scratches and dents. The metal type can also be chosen.

It is the base concrete texture. It is primitive and raw having large and small pores on the surface.

It is suitable for building plain walls, especially those in industrial style. The SBSAR file allows the hole sizes and depths to be adjusted.