They are concrete blocks which have a rectangular holes in the middle.

Using the SBSAR file, users can change the colors of tiles and grout, edge wear level, dent amount, crack amount, dirt level etc.

It is a split rib block which is made of concrete. The architectural structure is commonly used to build walls.

The SBSAR files allows users to change the colors of the tiles, change the amount of blocks in both axes, control the edge wear level and bump level, set the amount of dents etc.

It is a ground covered with broken tiles. Puddles can be found on this material. By close examination, concrete lines can be seen.

The SBSAR file allows users to adjust the tile amount, tilt level, grout depth, number of broken tiles, quantity of cracks, water level of puddles etc.

It is an old worn concrete wall which has a lot of large holes exposing inner reinforcement bars (rebars). The outer paint is also peeling off. Numerous cracks also appear on the concrete.

Using the SBSAR file, the wall colour, number of concrete plates and rebars, depth of holes etc. can be set.

The base is an asphalt road which is covered with bitumen of various colours.

Due to weathering, cracks can be found on the surface. The SBSAR file allows the amount and depth of the cracks to be adjusted.

It is the base concrete texture. It is primitive and raw having large and small pores on the surface.

It is suitable for building plain walls, especially those in industrial style. The SBSAR file allows the hole sizes and depths to be adjusted.

It is a wall made of concrete plates, but it is highly eroded making a very bumpy surface.

With the sbsar file, the grout intensity and damage level can be adjusted.

It is a simply rock texture, but can be applied to a large varieties of natural environment. It is simple, but useful.

It can be used to texture a single stone or as a rocky ground of cliff.

It is a concrete wall with some plaster, but has numerous dents of various sizes due to bumps, hits or shots.

It is a a plaster wall painted in white, but leaving prominent paint marks due to poor workmanship.

Pores can also be found on this concrete plaster texture.

Its normal map can be used as an imperfection or decal for walls.

From the grid pattern, we know that they are waffle slabs made of reinforced concrete. They grid pattern allows concrete ribs running in 2 directions perpendicular to each other on its underside.

As it appears in public area, dust and dirt can be found on the surface. Besides, there are imperfection at junctions between slabs.

It is a concrete texture composed of Corinthian columns. Due to weathering and aging, a lot of wear and cracks appear on the surface.

Despite its name columns, this texture suits extremely well for walls and urns.

It is a concrete wall made of numerous concrete plates. Due to weathering, the concrete plates have cracks, pores and dirt.

If you are going to 3D model a concrete wall, please do not miss this texture!

This is a stucco plaster. By examining the surface, a lot of fan shape trowel strokes or marks can be found.

This is a texture made of lots of gravel. It can be used as pavement for roads or to cover mud in backyard.

With your imagination, it could also be a wall texture.

It is exposed concrete aggregate pavement. Exposed concrete aggregate is commonly used as decorative concrete. The top layer of cement paste is removed and the underlying aggregate is exposed.

This kind of concrete is very durable and skid-resistant, so it is a great material for texturing sidewalks, driveways, pool decks etc.

It is also a good substance for rough walls.

It is a concrete wall painted in green, but it has a lot of cracks and most of the paint is peeling off.

The peeled off area shows the light brown concrete wall which is rather bumpy and has a lot of pores.

Scratches can also be found on both the paint and the concrete wall.

It is plainly a red brick wall, but the bricks are covered by a layer of grey cement.

Parts of the cement is worn and exposes the underneath red bricks.

Damage can be found on both the concrete layer and bricks.

This texture is a very primitive and raw concrete wall. It is a plain wall with nothing on the surface but dirt and worn marks.

There are different types of worn. Some are vertical while some are irregular. Some damage creates holes and gaps. Some aged parts pop up creating scar-like marks.

It is a perfect material for walls and floors.

They are Tadao Ando type of concrete plate. Concrete 0008 is horizontally arranged while this texture is vertically organized.

Besides, these concrete plates has 8 holes while Concrete 0008 has only 4 holes.

Dirt can easily be seen on the surface.