It is a tiled floor with cross-like patterns. There are edge wear, dirt, cracks, dents etc.

The SBSAR permits users to change the amount of tiles, adjust the grout width , edge wear level, tilts, surface, cracks, dents etc.

They are worn tiles in retro style having colourful square and diamond shaped patterns.

The SBSAR allows users to change the number of tiles, alignment random, rotation random, colours, levels of edge wear and dirt etc.

It is a fan-shape pavement covered by greyish cobblestones which are masked by a thin layer of brownish sand. Edge wear can also be found on these little rocks.

The SBSAR grants users the flexibility to change the numbers of cobblestones and rings, edge wear level, sand level etc. Users can also add puddles to the material though the default texture does not have any sign of puddles.

It is a ground covered with broken tiles. Puddles can be found on this material. By close examination, concrete lines can be seen.

The SBSAR file allows users to adjust the tile amount, tilt level, grout depth, number of broken tiles, quantity of cracks, water level of puddles etc.

It is a texture of chesterfields. The skin is highly worn with a lot of scratches, cracks and cuts. Some damaged areas even expose the yellow sponge-like filling of the sofa.

With the SBSAR file, the amount of cushions, the bulge level of cushions, the number of cuts and colors etc. can be changed.

It is a worn brick wall. Some bricks have been badly damaged and exposed inner part of the bricks which have different colours than outer paint. The bricks were roughly glued together. Thus, a lot of cement exists out of the grout.

The SBSAR gives users the flexibility to set the brick amount, colours and fine tune the damage level.

It is an old worn concrete wall which has a lot of large holes exposing inner reinforcement bars (rebars). The outer paint is also peeling off. Numerous cracks also appear on the concrete.

Using the SBSAR file, the wall colour, number of concrete plates and rebars, depth of holes etc. can be set.

It is a cactus. The texture maps contain a combined version of the cactus body and its spines, and separated layers of the body and spines.

The combined version let you texture a cactus quickly while the separated version let you adjust the spines and make them more pop put.

With the sbsar file, you can adjust the damage level of the cactus, number of columns of spines etc.

It is a wall made of concrete plates, but it is highly eroded making a very bumpy surface.

With the sbsar file, the grout intensity and damage level can be adjusted.

It is a brick wall texture which can be used for texturing medieval forts. Of course, it is suitable for modern architecture. There are smaller pebbles between large bricks.

It is a floor covered with irregular stones and a thin layer of sand is covering the rocks. It is a good material for both modern street view or medieval scenes.

It is a spider web. Some people may call it cobweb. Technically they are different, but most people use these 2 terms interchangeably.

With the sbsar file, you can control the damage level and number of silk lines. Besides, the deformation can also be controlled.

It is a concrete wall with some plaster, but has numerous dents of various sizes due to bumps, hits or shots.

It is a rocky and sandy ground where a lot of fossils were found. Among the fossils, some are popping up after the mud has been cleaned. They are waiting to be removed. Whereas the removed fossils left fossil holes on the muddy ground.

They are wood planks with nails on both ends. Rust can be found on the nails. The wood planks has a lot of worn areas due to weathering. Knots also appear on the planks.

They are wood planks painted in red, but some paint is peeling off due to weathering. Besides, there are wear and broken parts.

It is a fabulous material for creating old doors, fences and even houses.

It is a concrete texture composed of Corinthian columns. Due to weathering and aging, a lot of wear and cracks appear on the surface.

Despite its name columns, this texture suits extremely well for walls and urns.

It is a concrete wall made of numerous concrete plates. Due to weathering, the concrete plates have cracks, pores and dirt.

If you are going to 3D model a concrete wall, please do not miss this texture!

They are wood planks with nails. By close examination, there are rust on some nails. The edges of the planks have worn. and a lot of dirt and dust rests on the wood.

Near grouts, mosses may also be found.

It is a classic red brick wall. On the top is a thin layer of plaster that has a botched workmanship. Brush strokes are prominent. Besides, the plaster only covers some parts of the wall.